How to install the customized motorcycle trunk box products
07 Sep,2022
If only one screw on both sides of the trunk can't be adjusted properly, you can loosen all the screws, adjust the position of the customized motorcycle trunk box products, and then tighten the screws on both sides, and then adjust the position and finally tighten the top two screws. After adjusting the gap, try to open and close the lock of the customized motorcycle trunk box several times to ensure that the lock machine and the lock are properly aligned, otherwise you can loosen the screw on the rear panel to adjust the position of the lock, or use a hammer Swipe the latch to align it with the lock.
There is a special base under the customized motorcycle trunk box products, and the base is fixed on the rear shelf of the car with screws and iron plates, and then the tail box is stuck on the base with a screw plug or a clip. If there is no special base, it is not easy to install. If the customized motorcycle trunk box does not have its own screw holes, it is necessary to drill holes at the bottom, which is more troublesome to disassemble.
The cover and hinge of the customized motorcycle trunk box products with its own screw holes are usually fixed by four screws. Open the package of the rear trunk and loosen the first screw on each side of the hinge. Push and pull the lid of the customized motorcycle trunk box on the left and right sides and gently lower the alignment until the gaps on both sides are almost the same, then gently open the trunk lid and tighten the screws.
If only one screw on both sides of the trunk can't be adjusted properly, you can loosen all the screws, adjust the position of the customized motorcycle trunk box products, and then tighten the screws on both sides, and then adjust the position and finally tighten the top two screws. After adjusting the gap, try to open and close the lock of the customized motorcycle trunk box several times to ensure that the lock machine and the lock are properly aligned, otherwise you can loosen the screw on the rear panel to adjust the position of the lock, or use a hammer Swipe the latch to align it with the lock.
Guangdong jiaderui Motor Vehicle Accessories Co.,Ltd.
Add:Sanshui lndustrial Park, Foshan City, Guangdong Province
Tel:86-0757-81772137
WeChat/WhatsApp: +86-185-5269-3986
Fax: 0757-81772136
Web:www.fsjiaderui.com
E-mail:fsjiaderui@gmail.com
Add WeChat
Follow Jiaderui
Copyright© 2024 Guangdong jiaderui Motor Vehicle Accessories Co.,Ltd. www.300.cn | SEO | Business license